Microphone Accessories > Problem Solvers
A120S In-Line On/Off Switch
In-line, balanced, locking or momentary switch for a microphone. Note: Requires soldering.
In-line, balanced, locking or momentary switch for a microphone. Note: Requires soldering.
A15AS In-line Switchable Attenuator
Switchable in-line attenuator reduces the level of any balanced microphone or line-level signal by 15, 20, or 25 dB preventing input overloads.
Switchable in-line attenuator reduces the level of any balanced microphone or line-level signal by 15, 20, or 25 dB preventing input overloads.
A15BT Bridging Transformer
Matches, bridges, or isolates balanced and unbalanced devices of different impedances and levels. Male XLR to female XLR.
Matches, bridges, or isolates balanced and unbalanced devices of different impedances and levels. Male XLR to female XLR.
A15HP In-Line High Pass Filter
Balanced XLR in-line filter that reduces low frequencies below 100 Hz
Balanced XLR in-line filter that reduces low frequencies below 100 Hz
A15LA 50 dB Attenuator
Reduces the level of an audio signal by 50dB, which allows a line level output to be connected to a microphone input.
Reduces the level of an audio signal by 50dB, which allows a line level output to be connected to a microphone input.
A15PRS Switchable Phase Reverser
Reverses the phase (polarity) of a balanced audio signal. It can correct polarity reversal caused by a wiring error in a microphone cable and reduce comb filtering between two signals.
Reverses the phase (polarity) of a balanced audio signal. It can correct polarity reversal caused by a wiring error in a microphone cable and reduce comb filtering between two signals.
A15RF In-Line RF Interference Attenuator
Reduces interference from AM radio stations that may bleed into microphone lines when using long cables.
Reduces interference from AM radio stations that may bleed into microphone lines when using long cables.
A15TG Tone Generator
Battery-powered 700 Hz signal source used to troubleshoot audio systems by checking microphone lines for correct patching and detecting unusual noise that is present.
Battery-powered 700 Hz signal source used to troubleshoot audio systems by checking microphone lines for correct patching and detecting unusual noise that is present.
A1K Anti-Roll Ring for Handheld Microphones
Prevents handheld microphones and transmitters from rolling off a desk, podium, or other flat surface.
Prevents handheld microphones and transmitters from rolling off a desk, podium, or other flat surface.
A26M Dual Microphone Mount
Allows two Shure SM57, Beta 57A, or 545 Series microphones to be placed vertically on a standard microphone stand.
Allows two Shure SM57, Beta 57A, or 545 Series microphones to be placed vertically on a standard microphone stand.
A85F Line Matching Transformer
The Shure A85F is a low-to-high impedance microphone-matching transformer used to connect a balanced low-impedance microphone output to an unbalanced high impedance input on a mixer or recorder.
The Shure A85F is a low-to-high impedance microphone-matching transformer used to connect a balanced low-impedance microphone output to an unbalanced high impedance input on a mixer or recorder.
A95UF Line Matching Transformer (Female XLR to ¼” Male Plug/Female Jack)
Allows a balanced low-impedance microphone to be connected to an unbalanced high-impedance input. The transformer prevents high-frequency loss, level loss, and hum or noise pickup often associated with the use of high-impedance equipment.
Allows a balanced low-impedance microphone to be connected to an unbalanced high-impedance input. The transformer prevents high-frequency loss, level loss, and hum or noise pickup often associated with the use of high-impedance equipment.
A95U Line Matching Transformer (Male XLR to ¼” Male Plug/Female Jack)
Allows high-impedance a high impedance microphone to be connected to balanced low-impedance inputs.
Allows high-impedance a high impedance microphone to be connected to balanced low-impedance inputs.
A96F Camcorder Interface
Connects microphones with an XLR-type connector to the 3.5 mm inputs found on camcorders and other recording devices.
Connects microphones with an XLR-type connector to the 3.5 mm inputs found on camcorders and other recording devices.
WA360 In-Line Audio Mute Switch
In-line audio mute switch for Shure wireless bodypack transmitters with a TA4F connector.
In-line audio mute switch for Shure wireless bodypack transmitters with a TA4F connector.
