Problem Solvers
A120S In-Line On/Off Switch
In-line, balanced, locking or momentary switch for a microphone. Note: Requires soldering.
$32.50
In-line, balanced, locking or momentary switch for a microphone. Note: Requires soldering.
$32.50
A15AS In-line Switchable Attenuator
Switchable in-line attenuator reduces the level of any balanced microphone or line-level signal by 15, 20, or 25 dB preventing input overloads.
$52.50
Switchable in-line attenuator reduces the level of any balanced microphone or line-level signal by 15, 20, or 25 dB preventing input overloads.
$52.50
A15BT Bridging Transformer
Matches, bridges, or isolates balanced and unbalanced devices of different impedances and levels. Male XLR to female XLR.
$59.17
Matches, bridges, or isolates balanced and unbalanced devices of different impedances and levels. Male XLR to female XLR.
$59.17
A15HP In-Line High Pass Filter
Balanced XLR in-line filter that reduces low frequencies below 100 Hz
$62.50
Balanced XLR in-line filter that reduces low frequencies below 100 Hz
$62.50
A15LA 50 dB Attenuator
Reduces the level of an audio signal by 50dB, which allows a line level output to be connected to a microphone input.
$47.50
Reduces the level of an audio signal by 50dB, which allows a line level output to be connected to a microphone input.
$47.50
A15PRS Switchable Phase Reverser
Reverses the phase (polarity) of a balanced audio signal. It can correct polarity reversal caused by a wiring error in a microphone cable and reduce comb filtering between two signals.
$67.50
Reverses the phase (polarity) of a balanced audio signal. It can correct polarity reversal caused by a wiring error in a microphone cable and reduce comb filtering between two signals.
$67.50
A15RF In-Line RF Interference Attenuator
Reduces interference from AM radio stations that may bleed into microphone lines when using long cables.
$49.17
Reduces interference from AM radio stations that may bleed into microphone lines when using long cables.
$49.17
A15TG Tone Generator
Battery-powered 700 Hz signal source used to troubleshoot audio systems by checking microphone lines for correct patching and detecting unusual noise that is present.
$144.17
Battery-powered 700 Hz signal source used to troubleshoot audio systems by checking microphone lines for correct patching and detecting unusual noise that is present.
$144.17
A1K Anti-Roll Ring for Handheld Microphones
Prevents handheld microphones and transmitters from rolling off a desk, podium, or other flat surface.
$4.17
Prevents handheld microphones and transmitters from rolling off a desk, podium, or other flat surface.
$4.17
A26M Dual Microphone Mount
Allows two Shure SM57, Beta 57A, or 545 Series microphones to be placed vertically on a standard microphone stand.
$75.00
Allows two Shure SM57, Beta 57A, or 545 Series microphones to be placed vertically on a standard microphone stand.
$75.00
A85F Line Matching Transformer
The Shure A85F is a low-to-high impedance microphone-matching transformer used to connect a balanced low-impedance microphone output to an unbalanced high impedance input on a mixer or recorder.
$22.50
Currently Not Available
The Shure A85F is a low-to-high impedance microphone-matching transformer used to connect a balanced low-impedance microphone output to an unbalanced high impedance input on a mixer or recorder.
$22.50
Currently Not Available
A95UF Line Matching Transformer (Female XLR to ¼” Male Plug/Female Jack)
Allows a balanced low-impedance microphone to be connected to an unbalanced high-impedance input. The transformer prevents high-frequency loss, level loss, and hum or noise pickup often associated with the use of high-impedance equipment.
$47.50
Allows a balanced low-impedance microphone to be connected to an unbalanced high-impedance input. The transformer prevents high-frequency loss, level loss, and hum or noise pickup often associated with the use of high-impedance equipment.
$47.50
A95U Line Matching Transformer (Male XLR to ¼” Male Plug/Female Jack)
Allows high-impedance a high impedance microphone to be connected to balanced low-impedance inputs.
$47.50
Allows high-impedance a high impedance microphone to be connected to balanced low-impedance inputs.
$47.50
A96F Camcorder Interface
Connects microphones with an XLR-type connector to the 3.5 mm inputs found on camcorders and other recording devices.
$65.83
Connects microphones with an XLR-type connector to the 3.5 mm inputs found on camcorders and other recording devices.
$65.83
WA360 In-Line Audio Mute Switch
In-line audio mute switch for Shure wireless bodypack transmitters with a TA4F connector.
$74.25
In-line audio mute switch for Shure wireless bodypack transmitters with a TA4F connector.
$74.25
