Microphone Accessories
A120S In-Line On/Off Switch
In-line, balanced, locking or momentary switch for a microphone. Note: Requires soldering.
In-line, balanced, locking or momentary switch for a microphone. Note: Requires soldering.
A15AS In-line Switchable Attenuator
Switchable in-line attenuator reduces the level of any balanced microphone or line-level signal by 15, 20, or 25 dB preventing input overloads.
Switchable in-line attenuator reduces the level of any balanced microphone or line-level signal by 15, 20, or 25 dB preventing input overloads.
A15BT Bridging Transformer
Matches, bridges, or isolates balanced and unbalanced devices of different impedances and levels. Male XLR to female XLR.
Matches, bridges, or isolates balanced and unbalanced devices of different impedances and levels. Male XLR to female XLR.
A15HP In-Line High Pass Filter
Balanced XLR in-line filter that reduces low frequencies below 100 Hz
Balanced XLR in-line filter that reduces low frequencies below 100 Hz
A15LA 50 dB Attenuator
Reduces the level of an audio signal by 50dB, which allows a line level output to be connected to a microphone input.
Reduces the level of an audio signal by 50dB, which allows a line level output to be connected to a microphone input.
A15PRS Switchable Phase Reverser
Reverses the phase (polarity) of a balanced audio signal. It can correct polarity reversal caused by a wiring error in a microphone cable and reduce comb filtering between two signals.
Reverses the phase (polarity) of a balanced audio signal. It can correct polarity reversal caused by a wiring error in a microphone cable and reduce comb filtering between two signals.
A15RF In-Line RF Interference Attenuator
Reduces interference from AM radio stations that may bleed into microphone lines when using long cables.
Reduces interference from AM radio stations that may bleed into microphone lines when using long cables.
A15TG Tone Generator
Battery-powered 700 Hz signal source used to troubleshoot audio systems by checking microphone lines for correct patching and detecting unusual noise that is present.
Battery-powered 700 Hz signal source used to troubleshoot audio systems by checking microphone lines for correct patching and detecting unusual noise that is present.
A1K Anti-Roll Ring for Handheld Microphones
Prevents handheld microphones and transmitters from rolling off a desk, podium, or other flat surface.
Prevents handheld microphones and transmitters from rolling off a desk, podium, or other flat surface.
A1WS Microphone Windscreen
Reduces unwanted breath and wind noise. For use with the Shure Beta56, Beta57, and all 515 Series microphones. Available in gray.
Reduces unwanted breath and wind noise. For use with the Shure Beta56, Beta57, and all 515 Series microphones. Available in gray.
A202BB Microphone Desk Stand
Converts the Shure MX202 Overhead Microphone into a low-profile gooseneck microphone for use on a desk or tabletop.
Converts the Shure MX202 Overhead Microphone into a low-profile gooseneck microphone for use on a desk or tabletop.
A25D Microphone Clip
Securely mounts the SM58, SM57, SM87A, Beta 87A, Beta 87C and all other microphones with 3/4-inch and larger handles to a standard microphone stand.
Securely mounts the SM58, SM57, SM87A, Beta 87A, Beta 87C and all other microphones with 3/4-inch and larger handles to a standard microphone stand.
A25E Microphone Clip (for KSM9)
Securely mounts the Shure KSM9 microphone to a standard microphone stand.
Securely mounts the Shure KSM9 microphone to a standard microphone stand.
A26M Dual Microphone Mount
Allows two Shure SM57, Beta 57A, or 545 Series microphones to be placed vertically on a standard microphone stand.
Allows two Shure SM57, Beta 57A, or 545 Series microphones to be placed vertically on a standard microphone stand.
A27M Stereo Microphone Adapter
Stereo microphone adapter designed to hold two microphones in selectable positions for stereo broadcasting, recording or sound reinforcement.
Stereo microphone adapter designed to hold two microphones in selectable positions for stereo broadcasting, recording or sound reinforcement.
